Fuel flow sensor, with 10 ft cable and T-connector.
Fuel Flow Sensor Gasoline only. One required per engine. Up to 3 engines supported. Outputs:
-Fuel Flow
-Tank Fuel Used
-Trip Fuel Used
-Seasonal Fuel Used
Cable Length | 10 Ft |
Fuel Line Diameter | 3/8″ (9.5 mm) Inside Diameter |
Flow Rate Measured | Optimized for 0.6-45 Gal/hr but can measure outside these values |
Added Back Pressure to the fuel system | 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr |
Installation Location | Above the max level of the fuel tank, in-line after the fuel filter and any Y’s or T’s in the line |
Package | The Fuel Flow Sensor, N2K T and 2 (two) 1″ hose clamps |
Fuel Type | Gasoline only. The Fuel Flow Sensor does not operate diesel engine fuel systems. |
Hole required to route through a bulkhead | 22mm (7/8″) |
Multiple Fuel Flow sensors possible | Yes |
Specifications:
Cable Length | 10 Ft |
Fuel Line Diameter | 3/8″ (9.5 mm) Inside Diameter |
Flow Rate Measured | Optimized for 0.6-45 Gal/hr but can measure outside these values |
Added Back Pressure to the fuel system | 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr |
Installation Location | Above the max level of the fuel tank, in-line after the fuel filter and any Y’s or T’s in the line |
Package | The Fuel Flow Sensor, N2K T and 2 (two) 1″ hose clamps |
Fuel Type | Gasoline only. The Fuel Flow Sensor does not operate diesel engine fuel systems, or on any fuel system with a return line or sump. |
Hole required to route through a bulkhead | 22mm (7/8″) |
Multiple Fuel Flow Sensors possible | Yes |